RW1C025ZP pch -20v -2.5a small signal mosfet datasheet l l outline v dss -20 v sot-563t r ds(on) (max.) 65 m wemt6 i d 2.5 a p d 0.7 w l l inner circuit l l features 1) low on - resistance. 2) small high power package 3) low voltage drive(1.5v) l l packaging specifications type packing embossed tape reel size (mm) 180 l l application tape width (mm) 8 switching basic ordering unit (pcs) 8000 taping code t2cr marking zg l l absolute maximum ratings (t a = 25c ,unless otherwise specified) parameter symbol value unit drain - source voltage v dss -20 v continuous drain current i d 2.5 a pulsed drain current i dp *1 10 a gate - source voltage v gss 10 v power dissipation p d *2 0.7 w p d *3 0.4 w junction temperature t j 150 operating junction and storage temperature range t stg -55 to + 150 www.rohm.com ? 2016 rohm co., ltd. all rights reserved. 1/11 20160825 - rev. 001 not recommended for new designs
RW1C025ZP datasheet thermal resistance parameter symbol values unit min. typ. max. thermal resistance, junction - ambient r thja *2 - - 179 /w r thja *3 - - 292 /w electrical characteristics (t a = 25c) parameter symbol conditions values unit min. typ. max. drain - source breakdown voltage v (br)dss v gs = 0 v, i d = -1 ma -20 - - v breakdown voltage temperature coefficient v (br)dss i d = -1 ma - -21.9 - mv/ t j referenced to 25 zero gate voltage drain current i dss v ds = -20 v, v gs = 0 v - - -1 a gate - source leakage current i gss v gs = 10 v, v ds = 0 v - - 10 a gate threshold voltage v gs(th) v ds = -10 v, i d = -1 ma -0.3 - -1.0 v gate threshold voltage temperature coefficient v gs(th) i d = -1 ma - 2.4 - mv/ t j referenced to 25 static drain - source on - state resistance r ds(on) *4 v gs = -4.5 v, i d = -2.5 a - 48 65 m v gs = -2.5 v, i d = -1.2 a - 65 90 v gs = -1.8 v, i d = -1.2 a - 90 135 v gs = -1.5 v, i d = -0.5 a - 120 240 gate resistance r g f = 1 mhz, open drain - 19.3 - forward transfer admittance |y fs | *4 v ds = -10 v, i d = -2.5 a 2.2 - - s *1 pw Q 10 s , duty cycle Q 1% *2 mounted on a ceramic board (30300.8mm) *3 mounted on a fr4 (12200.8mm,cu pad:240mm 2 ) *4 pulsed www.rohm.com ? 2016 rohm co., ltd. all rights reserved. 2/11 20160825 - rev. 001 not recommended for new designs
RW1C025ZP datasheet electrical characteristics (t a = 25c) parameter symbol conditions values unit min. typ. max. input capacitance c iss v gs = 0 v - 1300 - pf output capacitance c oss v ds = -10 v - 90 - reverse transfer capacitance c rss f = 1 mhz - 70 - turn - on delay time t d(on) *4 v dd ? -10 v,v gs = -4.5 v - 9 - ns rise time t r *4 i d = -1.2 a - 18 - turn - off delay time t d(off) *4 r l ? 8.3 - 110 - fall time t f *4 r g = 10 - 50 - gate charge characteristics (t a = 25c) parameter symbol conditions values unit min. typ. max. total gate charge q g *4 v dd ? -10 v, i d = -2.5 a, v gs = -4.5 v - 10.5 - nc gate - source charge q gs *4 - 2.0 - gate - drain charge q gd *4 - 1.5 - body diode electrical characteristics (source-drain) (t a = 25c) parameter symbol conditions values unit min. typ. max. continuous forward current i s t a = 25 - - -0.5 a pulse forward current i sp *1 - - -10 a forward voltage v sd *4 v gs = 0 v, i s = -2.5 a - - -1.2 v www.rohm.com ? 2016 rohm co., ltd. all rights reserved. 3/11 20160825 - rev. 001 not recommended for new designs
RW1C025ZP datasheet electrical characteristic curves fig.1 power dissipation derating curve fig.2 maximum safe operating area fig.3 normalized transient thermal resistance vs. pulse width fig.4 single pulse maximum power dissipation www.rohm.com ? 2016 rohm co., ltd. all rights reserved. 4/11 20160825 - rev. 001 not recommended for new designs
datasheet
|